Recochem
Turbo Power Heavy Duty Diesel Anti-Freeze & Coolant - 9.46 L
59.99
A traditional coolant ideally suited for older vehicles this HD expert classic antifreeze/coolant is a fully formulated engine coolant based on an exclusive formulation of corrosion inhibitors. It is a low silicate; phosphate and amine free; aluminum compatible coolant that you can use in automotive, light duty, heavy duty diesel and natural gas engine vehicles such as on-road truck, off-road and farm equipment. Experts recommend this product for use where a fully formulated heavy duty diesel coolant is required.
Features
- Heavy duty diesel antifreeze/coolant is a superior fully formulated ethylene glycol based product containing SCA pre-charge with low silicate corrosion inhibitors
- Provides exceptional cooling and excellent protection against freezing in winter
- Recommended for all heavy duty diesel applications including truck, off-road, marine and farm engines
- Complies with the low silicate requirements necessary for diesel engines
- Engines with aluminum heads or blocks are most effeciently protected by regular Unival Anti-freeze which offers an inhibitor system particulary suited to aluminum (HH #8612-147/165)
- Consult Owner's Manual to determine cooling system capacity
- Check cooling system for leaks
- Flush system while heater is on high (for best results use Unival Rad flush - HH #8651-581)
- Open radiator petcock and drain radiator
- Close petcock
- Add required solution to achieve a minimum 50/50 mix in the total cooling system
- To remove air bubbles, start engine and run until heater is operating
- Top up radiator and coolant reservoir to required level
- Reset rad cap
- Check coolant condition periodically and change annually for best corrosion protection
- No odour
- pH 10.4
- Non-flammable
- Specific Gravity: 1.067 g/L
- Reserve Alkalinity: 10 minimum
Specifications
- Item Number
- 8612316
- Unit of Measurement
- EA