Nutone
110 CFM 1.0 Sones Humidity Sensing Ceiling Vent Fan
239.99
Features
BLOWERS
- Plug-in, permanently lubricated motor - engineered for continuous operation
- Dynamically balanced centrifugal blower wheel for quiet, efficient performance
- Low RPM for quiet operation
- Rugged, 26 gauge, galvanized steel construction
- Polymeric, 4" duct connector with tapered sleeve and no metallic clatter
- 5-3/4" height allows for 2" x 6" ceiling installations
- Sturdy, easy, four-point mounting directly to joist
- Polymeric construction
- Innovative design - the result of extensive research with designers and consumers
- Humidity control automatically turns fan ON when either of these conditions is detected: a rapid to moderate (user adjustable) increase of humidity or humidity is above user-adjustable set-point (50%-80% RH)
- Two wire manual operation for odor control - turns fan ON when power line through wall switch is cycled ON, OFF and back ON
- Remains ON for a user-adjustable 5 to 60 minutes after humidity has stabilized and is below set-point or after manually initiated through power line cycling
- Saves energy because unit runs only for the time required
- ULC Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit (ceiling mount only)
- 120V
- 60Hz
- 0.3A
- Airflow (CFM): 110
- Sound (sones): 1.0
- Power (watts): 23.4
- Efficacy (CFM/W): 4.7
- Airflow (CFM): 92
- 10" L x 9-1/4" W x 5-3/4" H
Specifications
- Item Number
- 3854101
- Unit of Measurement
- EA
- Weight
- 10 LB
- Assembled Length
- 9.25"
- Assembled Height
- 5.75"
- Assembled Width
- 10"