Iberville
2-1/4" Non-Gangable Rework Switch Box
17.99
To install a device into an existing wall.
Features
- Installed from the front of the drywall (for retrofit installation)
- Swing-arm rework brackets
- Maximum wall thickness: 3/4"
- 3" x 2" x 2-1/4" deep
- Flush ears
- One 1/2" bottom knockout
- 4 pryout ends
- Using the template supplied with each box, trace the box pattern on the desired location
- Cut opening using the traced lines
- Remove the pryout from the box, pull thru the cable and tighten the cable clamp
- Insert the box into the cut-out while holding the "Swing-arm" against the sides of the box
- Turn both "Swing-arm" tightening screws (This will cause the "Swing-arm" holding device to turn to the proper position and then tighten itself against the back face of the drywall)
Specifications
- Item Number
- 3614618
- Unit of Measurement
- EA
- Assembled Length
- 2.25"
- Assembled Height
- 3"
- Assembled Width
- 2"