Drylok
Masonry Latex Base Waterproofer - Clear, 3.78 L
The answer to your waterproofing problems is clear. If water is leaking through existing masonry or you need to protect new construction, Drylok Waterproofer is guaranteed to stop water to 4 PSI. It is the first clear (non-pigmented), abrasion-resistant, high-gloss waterproof coating approved for floor and wall applications. Unlike ordinary paint that simply adheres to a surface and can be forced off by incoming water pressure, DRYLOK® Clear Masonry Waterproofer actually penetrates the pores in that surface, bonding to the masonry and creating an impenetrable barrier. You can waterproof interior, exterior, above or below grade walls. DRYLOK® Clear Masonry Waterproofer is also perfect for floors, basements, retaining walls, decorative brick and stone facades, and more.
Features
- Clear latex base waterproofer
- Stops hydrostatic pressure and resists wind driven rain
- Use on floors walls and decorative surfaces
- Provides a moisture/vapour barrier to floors prior to applying a floor covering
- Can be used as a top coat or under latex paint
- Apply with brush for best results but can be applied by roller or spray
- Coverage approximately 100 sq. ft. per gallon
- Dry time 2 hours recoat in 4 hours
- Light foot traffic in 4 hours heavy traffic in 24 hours
- High gloss finish
Specifications
- Item Number
- 1886182
- Unit of Measurement
- EA
- Colour Family
- Clear
- Paint Base
- ACRYLIC/LATEX/WATERBASE