Cut-n-seal
End Cut Wood Preservative - Sienna, 3.78 L
45.99
Cut-N-Seal® is a colour-matched, brush-on wood preservative for cuts and holes in pressure treated wood that expose untreated wood in above ground applications. The copper-based, waterborne formula is low VOC and low odour. Cut-N-Seal is not to be used in preserved wood foundations, to recoat pressure treated wood surfaces, or as a replacement for pressure treatment. Not for use in Dwellings.
Features
- Brush on two coats of Cut-N-Seal wood preservative on all cuts and holes in pressure treated wood that expose untreated wood
- For use above ground on deck boards, railing, post tops, and fence boards
- Protects cut ends against rot and decay
- Copper-based, waterborne formulation
- Low VOC and low odour
- Ready to use; shake or stir before and during use
- Apply by brush; do not spray or dip
- Apply above 10°C; keep from freezing
- Soap and water clean-up
- Sienna/cedar colour closely matches brown pressure treated wood
- 3.78 L
- **NOTE** Does not replace pressure treatment
Specifications
- Item Number
- 1874952
- Unit of Measurement
- EA
- Colour Family
- Brown
- Paint Base
- ACRYLIC/LATEX/WATERBASE
- Finish
- Semi-transparent